Pool Alkalinity Calculator
Calculate how much baking soda or muriatic acid your pool needs to reach the right alkalinity.
US Pool Alkalinity Dose Reference
| Pool volume | Raise 10 ppm: baking soda (lb) | Lower 10 ppm: muriatic acid (fl oz) |
|---|---|---|
| 5,000 gal | 0.8 lb | 13 fl oz |
| 10,000 gal | 1.5 lb | 25 fl oz |
| 15,000 gal | 2.3 lb | 38 fl oz |
| 20,000 gal | 3 lb | 50 fl oz |
| 25,000 gal | 3.8 lb | 63 fl oz |
| 30,000 gal | 4.5 lb | 75 fl oz |
| 35,000 gal | 5.3 lb | 88 fl oz |
| 40,000 gal | 6 lb | 100 fl oz |
| 45,000 gal | 6.8 lb | 113 fl oz |
| 50,000 gal | 7.5 lb | 125 fl oz |
Metric Pool Alkalinity Dose Reference
| Pool volume | Raise 10 ppm: baking soda (kg) | Lower 10 ppm: muriatic acid (mL) |
|---|---|---|
| 20,000 L | 0.36 kg | 384 mL |
| 30,000 L | 0.54 kg | 591 mL |
| 40,000 L | 0.73 kg | 769 mL |
| 60,000 L | 1.09 kg | 1183 mL |
| 80,000 L | 1.45 kg | 1567 mL |
| 100,000 L | 1.81 kg | 1952 mL |
How to Raise Alkalinity in Pool
Baking Soda Pool Calculator
Raise alkalinity with baking soda (sodium bicarbonate), not soda ash. Baking soda is gentle and has only a small effect on pH. As a starting estimate, 1.5 lb per 10,000 gallons raises alkalinity about 10 ppm. Add no more than the label recommends at once, split a large dose into portions, circulate for several hours, and retest after 4–6 hours.
How to Lower Alkalinity in Pool
Lower alkalinity with muriatic acid or dry acid (sodium bisulfate). Acid also lowers pH, so use the correction cycle: add acid, let pH drop, then aerate with raised return jets or a water feature. Aeration brings pH back up while alkalinity stays lower. Repeat gradually until both readings are in range. Wear eye and skin protection, never mix acid with chlorine, and wait at least 30 minutes with circulation before swimming; confirm test results first.
What Is the Ideal Pool Alkalinity Range?
For most pools, ideal alkalinity is 80–120 ppm. Total alkalinity buffers pH: when it is unstable, pH tends to drift or bounce and becomes difficult to manage. pH and alkalinity influence each other, so use the Pool pH Calculator alongside this calculator.
Pool Alkalinity Recommendations by Brand
| Brand | Suggested alkalinity range | Official source |
|---|---|---|
| Pentair | 80–120 ppm | Pentair water chemistry guidance |
| Hayward | 80–120 ppm | Hayward water chemistry guide |
| Clorox | 80–120 ppm | Clorox pool care guidance |
| HTH | 60–120 ppm | HTH pool care guidance |
Frequently Asked Questions
What should my pool alkalinity be?
The ideal pool alkalinity range is 80–120 ppm for most pools. Follow your pool surface and sanitizer manufacturer guidance if it differs.
Does baking soda raise alkalinity?
Yes. Baking soda (sodium bicarbonate) is the standard gentle way to raise total alkalinity, with only a small effect on pH.
Will baking soda raise pH too?
Baking soda may raise pH slightly, but its main job is raising alkalinity. Use soda ash (sodium carbonate) when the main correction needed is pH.
How much baking soda do I add per 10,000 gallons?
As a starting estimate, about 1.5 lb of baking soda raises alkalinity by 10 ppm in 10,000 gallons. Add in portions, circulate, and retest.
How do I lower alkalinity without lowering pH?
Acid lowers alkalinity and pH together. Use muriatic acid or dry acid, then aerate the water to raise pH while alkalinity stays lower.
Can I add baking soda and shock at the same time?
Add them separately. Test and adjust alkalinity first, let the pump circulate, and follow each product label rather than mixing chemicals.
Why does my alkalinity keep dropping?
Frequent acid additions, acidic rain, source water, heavy aeration, and swimmer or refill effects can lower alkalinity. Test before correcting.
How often should I test alkalinity?
Test weekly during regular use and after heavy rain, water replacement, major chemical changes, or whenever pH becomes difficult to control.